Print_M0128681.doc Page 2 of 32
2
Design Size : A5 Paper Size : B5 Save Date : 2009/11/16 10:29:00
Software Guide
Monitoring and Configuring the Printer > Using
Web Image Monitor > Configuring the Network
Settings > Configuring the Network Application
Settings
Do not specify "49999" in addition to "53550" for [Port #] under
[Network Print Settings].
Software Guide
Monitoring and Configuring the Printer > Using
Web Image Monitor > Configuring the Network
Settings > Configuring the DNS Settings
A number between 1 through 999 can be specified for [DNS
Timeout [Seconds]].
Software Guide
Monitoring and Configuring the Printer > Using
Smart Organizing Monitor > Displaying the
Printer Status
When you are printing via USB connection, the printer information
in Smart Organizing Monitor might not be updated correctly.
Software Guide
Special Operations under Windows > Printing
Files Directly from Windows > Printing
Commands > lpr
The correct syntax for the "lpr" command is as follows.
c:> lpr -S printer's IP address -P printer name [-o l] \path\file name
c:> lpr -S printer's host name -P printer name [-o l] \path\file name
Software Guide
Special Operations under Windows > Printing
Files Directly from Windows > Printing
Commands > ftp
The correct syntax for the "ftp" command is as follows.
ftp>put \path\file name [Option]
ftp>mput \path\file name [\path\file name]
Software Guide
Special Operations under Windows > Printing
Files Directly from Windows > Printing
Commands > ftp
"User" and "Password" for transferring data by ftp are both fixed to
"sysadm". To transfer data by ftp, enter "sysadm".
Topic Errors Correction
Hardware Guide
Installing the Printer and Options > Installing
the Printer > Unpacking
Quick Installation Guide
2.Unpacking
5. Remove the protective material
attached inside the printer.
BXG014
5. Remove the protective material
attached inside the printer.
BXF099
The following descriptions do not apply to this machine.
Topic Errors
Hardware Guide
Connecting the Printer > Network Connection
Important
Use shielded Ethernet cable. Unshielded cables create
electromagnetic interference that could cause malfunctions.
Hardware Guide
Paper and Other Media > Paper Recommendations
> Types of Paper and Other Media > Types of paper
Hardware Guide
Paper and Other Media > Loading Paper > Loading
Paper in the Bypass Tray > Loading envelopes
Avoid using self-adhesive envelopes. They may cause printer
malfunctions.
Hardware Guide
Troubleshooting > Error & Status Messages on
Smart Organizing Monitor
Load paper of the selected size in the tray, and then change the
paper size setting with Smart Organizing Monitor.
Software Guide
Other Print Operations > Collate
Note
If Auto Continue occurs on the first set, the Collate will be canceled.
If form feed occurs on the first set, the Collate will be canceled.
Reference
For details about printing method, see the printer driver Help.
To Next Page
Loading...
