Item Description Value
Notify
Forward Status
Sets the machine to send e-mail
notifications after faxes are forwarded.
The e-mail notification destination
depends on how the forwarding
destination is configured using Web
Image Monitor (for details, see
page 228 "Configuring the System
Settings").
• Inactive
• Active
Default: [Inactive]
Delete Standby File
Deletes unsent fax jobs remaining in the machine's memory. The machine can store up to 5 unsent
fax jobs. This function is only performed when selected.
Item Description Value
Delete
Selected File
To delete a fax job, select the desired
job, and then press the [OK] key.
Pressing the [Back] key exits to the
previous level of the menu tree without
deleting the fax job.
Delete All Files To delete the fax jobs, press the [OK]
key. Pressing the [Back] key exits to the
previous level of the menu tree without
deleting the fax jobs.
Communication Settings
Item Description Value
ECM
Transmission
Sets the machine to automatically
resend parts of the data that are lost
during transmission.
• Off
• On
Default: [On]
ECM
Reception
Sets the machine to automatically
receive parts of the data that are lost
during reception.
• Off
• On
Default: [On]
7. Configuring the Machine Using the Control Panel
188
To Next Page
Loading...
