Message Causes Solutions
Fax Job Memory
Overflow
The number of fax jobs in
memory (unsent or unprinted
faxes) has reached maximum,
so new jobs cannot be stored.
Wait until pending jobs have been
transmitted or printed.
I-Fax POP3 fails Connection to the POP3 server
failed.
• Confirm that the network cable is
properly connected to the machine.
• Confirm that the network settings such
as IP address, DNS, and POP3
settings have been configured
properly (make sure that no double-
byte character is used). See
page 236 "Configuring the Network
Settings".
Indep.Sply.Prt.Cart. A non-supported print cartridge
is installed.
Remove and replace it with a print
cartridge specified by an authorized
dealer.
Internal Misfeed Paper has been jammed in the
machine.
Remove the jammed paper. See
page 281 "Clearing Misfeeds".
Memory Almost Full Memory has almost reached
capacity during sort copy.
If several originals are still to be scanned,
it is recommended to start printing now,
and copy the remaining originals
separately. If originals are being scanned
from the ADF, remove any remaining
pages from the ADF.
Memory Overflow The data is too large or
complex to print.
• Select [600 × 600 dpi] in
[Resolution] under [Printer Features]
to reduce the size of data. See
page 198 "Printer Features Settings".
• If using the PCL6 printer driver, set
[Resolution] in the [Print Quality] tab
to [600 × 600 dpi].
10. Troubleshooting
274
To Next Page
Loading...
