1. Lift the paper tray slightly, and then pull it out until it stops. Adjust the paper size dial to
match the size and feed direction of paper in the paper tray.
2. Lift the front side of the tray, and then pull it out of the printer.
3. Pinch the green clips on the side guide and the end guide, and then adjust the guides to the
paper size being loaded.
4. Slide the two green switches into one of the two positions according to the thickness of the
paper you are loading. If the paper is 157 g/m
2
(42 lb.) or thicker, slide both switches into
5. Paper and Other Media
100
To Next Page
Loading...
