the rear (thick) position. If the paper is lighter than 157 g/m
2
(42 lb.), slide both switches
into the forward (thin) position.
Make sure that the positions of both switches are the same.
5. Fan the paper before loading paper in the paper tray.
6. Load paper into the tray with the print side down.
7. Adjust the paper guides to close any gaps.
Do not move paper loaded in the tray more than a few millimeters.
Excessive movement of loaded paper can cause edges of sheets to snag on the openings of the tray's
lifting plate, resulting in sheets being folded or becoming jammed.
Loading Paper
101
To Next Page
Loading...
