By pressing the [ ] or [ ] key, the value increases or decreases by 0.1 mm (0.01 inch).
By pressing and holding the [ ] or [ ] key, the value varies by 1 mm (0.1 inch).
The screen for entering the length appears.
6. Press the [ ] or [ ] key to enter the vertical value, and then press the [OK] key.
By pressing the [ ] or [ ] key, the value increases or decreases by 0.1 mm (0.01 inch).
By pressing and holding the [ ] or [ ] key, the value varies by 1 mm (0.1 inch).
The screen for entering the length appears.
About two seconds later, the display returns to the [Paper Input] screen.
7. Press the [Menu] key.
The display returns to the initial screen.
Specifying a paper type for Tray 1 and the optional paper feed unit
Improve printer performance by selecting the optimum paper type for the tray. You can select from the
following paper types:
• No Display (Plain Paper), Recycled Paper, Special Paper 1, Special Paper 2, Colour Paper,
Letterhead, Label Paper, Envelope, Preprinted Paper, Bond Paper, Cardstock, Thick Paper 1, Thick
Paper 2
You can select custom paper type settings made using Web Image Monitor.
Loading Paper
107
To Next Page
Loading...
