Ricoh SP6330 - 8 Adjusting the Printer; Adjusting the Image Density

8. Adjusting the Printer
This chapter explains how to adjust the image density and print position.
Adjusting the Image Density
You can adjust the image density using the control panel if the image density is not appropriate.
• Extreme settings may create printouts that appear dirty.
• Image Density settings should be made from the application or the printer driver whenever possible.
1. Press the [Menu] key.
BVP006
2. Press the [ ] or [ ] key to select [Maintenance], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Quality Maintenance], and then press the [OK] key.
4. Press the [ ] or [ ] key to select [Image Density], and then press the [OK] key.
161
8