5. Press the [ ] or [ ] key to select [Print Test Sheet], and then press the [OK] key.
6. Press the [ ] or [ ] key to select the tray you want to adjust, and then press the [OK] key.
Print the test sheet to preview the settings.
7. Confirm the position of the image on the test sheet, and then adjust the registration value.
In this setting, adjust the margins of the test sheet so that they are equal in size.
8. Press the [Escape] key to return to the registration menu.
9. Press the [ ] or [ ] key to select [Adjustment], and then press the [OK] key.
10. Press the [ ] or [ ] key to select the tray you want to adjust, and then press the [OK] key.
11. Press the [ ] or [ ] key to change the registered value (mm).
8. Adjusting the Printer
164
To Next Page
Loading...
