Ricoh SP6330 - Page 88

Metric version / Inch version
120 V
A3 , B4 JIS , A4 , B5 JIS , A5 , A6 , 8K , 16K ,
8
1
/
4
" × 13" (Folio) , 8" × 13" (F/GL) , 7
1
/
4
" ×
10
1
/
2
" (Executive) , 5
1
/
2
" × 8
1
/
2
" (Half Letter)
Tray 1 supports custom size paper, approximately 90 - 297 mm (3.6 - 11.7 inches) in width, and
148 - 432 mm (5.9 - 17 inches) in length. Set as custom size using the control panel and printer
driver.
The supported size may differ depending on the printer language you use.
Input Paper Sizes Paper Feed Unit (Tray 2/3)
Metric version / Inch version
A3 , A4 , 11" × 17" , 8
1
/
2
" × 14" (Legal) , 8
1
/
2
" × 11" (Letter)
The following sizes are supported but not indicated on the tray dial. You should set the tray dial to
" ", and select the paper size with the control panel.
Metric version / Inch version
B4 JIS , B5 JIS , A5 , A6 , 8K , 16K , 8
1
/
2
" × 13" (Foolscap) , 8
1
/
4
" × 13" (Folio)
, 8" × 13" (F/GL) , 7
1
/
4
" × 10
1
/
2
" (Executive)
Tray 2/3 supports custom size paper, approximately 182 - 297 mm (7.2 - 11.7 inches) in width,
and 148 - 432 mm (5.9 - 17 inches) in length.
Input Paper Sizes Bypass Tray
The following paper size is supported but the paper size should be set with the control panel.
There is no dial on the tray.
Metric version / Inch version
A3 , B4 JIS , A4 , B5 JIS , A5 , A6 , 8K , 16K , 11" × 17" , 8
1
/
2
" × 14" (Legal)
, 8
1
/
2
" × 13" (Foolscap) , 8
1
/
2
" × 11" (Letter) , 8
1
/
4
" × 13" (Folio) , 8" × 13" (F/GL) ,
7
1
/
4
" × 10
1
/
2
" (Executive) , 5
1
/
2
" × 8
1
/
2
" (Half Letter) , 4
1
/
8
" × 9
1
/
2
" (Com#10 Env.) ,
C5 Env. , C6 Env. , DL Env. , 3
7
/
8
" × 7
1
/
2
" (Monarch Env.)
Bypass Tray supports custom size paper, approximately 64 - 305 mm (2.6 - 12 inches) in width, and
148 - 1260 mm (5.9 - 49.6 inches) in length. Set as custom size using the printer driver.
The supported size may differ depending on the printer language you use.
See p.96 "Loading Paper".
5. Paper and Other Media
86
5