STEP2
Connecting the camera to a smartphone
1. Press the wireless button. The wireless lamp flahes in blue.
2. Display the Wi-Fi™ settings of the smartphone.
3. Check the serial number printed at the bottom of the camera.
* The serial number printed at the bottom of the camera is the same as the SSID and password. 4.
Select "THETA*******.OSC" from the network list and enter the password.
* "*********" of SSID part is indicated by (B).
* The password is indicated by (A). 5. When the wireless lamp lights in blue, the camera is
connected to the smartphone.
To Next Page
Loading...