Ricoh WG-20 - Turning the Camera on

12
Press the Power Switch
The camera turns on and is ready to take still
pictures. Press the power switch again to turn
the camera off.
Make the Initial Settings
The [Language/ ] screen appears when the camera is turned on
for the first time. Select the desired language and then set the date
and time.
Use the four-way controller
(2345) to select the desired
language.
Press the 4 button.
The [Initial Setting] screen
appears.
If you accidentally select the wrong
language and press the 4 button,
press the four-way controller (5), use
the four-way controller (2345) to
select the desired language, and then
press the 4 button. The [Initial
Setting] screen appears in the
selected language.
MENU OK
Cancel OK
1
2
2
Memo
MENU
Cancel
Initial Setting
Hometown
New York
Settings complete
English
DST
OFF
OFF
OFF
Turning the Camera On
2
2
PentaxWG20_QSG.book Page 12 Tuesday, February 4, 2014 11:36 AM