Ricoh WG-20 - Taking Pictures

16
Aim the camera at the subject, then press the shutter release button.
The flash discharges automatically depending on the brightness.
Frame the subject using the focus frame on the display.
Press the w/x button to change the captured area.
Press the shutter release button halfway.
The focus frame on the display turns green if the subject is in
focus.
Press the shutter release button
fully.
The picture is taken.
2
1
2
2
Widens the area
that is captured by
the camera
Enlarges the
subject
2
3
F4.6
1/250
38
2
4
Taking Pictures
3
3
PentaxWG20_QSG.book Page 16 Tuesday, February 4, 2014 11:36 AM