115
3
Taking Pictures
For setting the tone of images.
You can select from [Bright], [Natural], or [Monochrome].
The default setting is [Bright].
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Image Tone].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller
(23) to select a finishing tone.
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture mode.
Setting the Image Tone
• When [Monochrome] is selected, [Tone Adjustment] appears on
the [A Rec. Mode] menu for setting the tone of monochrome images
instead of [Saturation].
• Select [Monochrome] in (Report) mode to fix the Tone Adjustment
setting to [Standard].
Rec. Mode
1/4
Natural
Monochrome
MENU
Cancel
OK
OK
AWB
Recorded Pixels
Image Tone
Quality Level
White Balance
AE Metering
AF Setting
Bright
WG20_OPM_ENG.book Page 115 Wednesday, February 5, 2014 2:20 PM
To Next Page
Loading...
