Ricoh WG-20 - Setting Blink Detection

129
3
Taking Pictures
This specifies whether Blink Detection works when you use the Face
Detection function. The default setting is O (On).
1 Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2 Use the four-way controller (23) to select [Blink
Detection].
3 Use the four-way controller ( 45 )
to switch between
O (On)
or
P (Off).
O(On) Blink Detection function
works.
P (Off) Blink Detection function
does not work.
The setting is saved.
4 Press the 3 button.
The camera returns to capture mode.
Setting Blink Detection
Blink Detection 1p.68
If the Blink Detection function detected closed eyes when shooting,
[Closed eyes have been detected] is displayed for 3 seconds during
Instant Review.
Rec. Mode
3/4
MENU
Exit
Green Button
Interval Shoot
Blink Detection
Instant Review
Memory
Digital Zoom
WG20_OPM_ENG.book Page 129 Wednesday, February 5, 2014 2:20 PM