Ricoh WG-20 - Connecting the Camera to AV Equipment; Connecting the Camera to a Video in Jack

172
4
Playing Back and Deleting Images
Connecting the Camera to AV Equipment
You can connect the camera to a TV or other device with a video IN jack
or HDMl terminal and playback images.
By using the optional AV cable (I-AVC7), you can capture and play back
images on equipment with a video IN jack, such as a TV.
• The power lamp on the camera lights up during a connection.
• If you intend to use the camera continuously for a long period, use
of the AC adapter kit K-AC117 (optional) is recommended. (p.38)
• For AV equipment with multiple video IN jacks, check the operating
manual of the AV device, and select the video IN jack to which
the camera is connected.
• You cannot output composite and HDMI video at the same time.
• The camera display turns off while the camera is connected to AV
equipment.
• You cannot adjust the volume on the camera when connected
to an AV device. Adjust the volume on the AV device.
• When the camera is connected to an AV device, you can change
the images with the remote control (optional).
Connecting the Camera to a Video IN Jack
VIDEO
AUDIO
(L) (R)
External Input
Terminal
PC/AV terminal
Yellow White
WG20_OPM_ENG.book Page 172 Wednesday, February 5, 2014 2:20 PM