173
7
Connecting to a Computer
• Images are transferred via a wireless LAN. Set [FlashAir Setting] to P (Off),
or do not use an FlashAir card in locations where the use of wireless LAN
devices is restricted or prohibited, such as on airplanes.
• Transferring a large number of images may take a while. Use a battery with
ample capacity remaining.
• Auto Power Off does not function while the FlashAir card is connected as
a wireless LAN.
• The camera may be turned off automatically to protect the internal
components when the inside of the camera reaches a high temperature
caused by transferring a large file such as a movie.
• For details on how to use a FlashAir card, refer to the operating manual
supplied with the card.
• In case of malfunction of a FlashAir card, refer to the manufacturer of the
card.
• The camera has a function to set the start mode of a FlashAir card. Please
note, however, that not all FlashAir card functions are guaranteed to
operate.
• Use of a FlashAir card is permitted only in the country where the FlashAir
card is purchased. Observe local and national regulations of the country
where the card is to be used.
To Next Page
Loading...
