Need help?Do you have a question about the Ridemakerz RIDE and is the answer not in the manual?
General| Product Dimensions | 10 x 6 x 4 inches |
|---|---|
| Item Weight | 1.5 pounds |
| Recommended Age | 6 years and up |
| Batteries Required | Yes |
| Battery Type | AA |
| Number of Batteries | 4 |
| Manufacturer | Ridemakerz |
| Manufacturer Recommended Age | 6 years and up |
Emphasizes adult supervision and lists battery handling precautions.
Provides tips for optimal performance and safe operation of the RIDE.
Discusses radio control operation, FCC warnings, and interference.
Instructions on how to install batteries in the transmitter.
Step-by-step guide for installing batteries into the vehicle chassis.
Step-by-step guide for installing batteries into the Monster chassis.
Explains how to select different frequency bands for playing with multiple RIDEZ.
Details how to set the same band on the controller and the RIDE body.
Discusses managing multiple RIDEZ using different frequencies and chassis types.
Locates the RIDESOUNDZ port on the Monster chassis.
Locates the RIDESOUNDZ port on the Street chassis.
Instructions for inserting and securing the RIDESOUNDZ module.
Step-by-step guide for attaching the RIDE body to the chassis.
Instructions on how to assemble wheels and treadz together.
Guide on how to attach the assembled wheels to the RIDE.
Steps for removing and replacing wheels and treadz.
Step-by-step guide for attaching the Monster RIDE body to the chassis.
Instructions on how to combine wheels and treadz.
Guide on how to mount the assembled wheels onto the RIDE.
Steps for removing and replacing wheels and treadz.
Describes the use of built-in magnets for attaching accessories.
A safety warning regarding small magnets in the product.
Explains how chassis slots and accessory tabs work together for attachment.
Instructions for controlling the RIDE in Street mode.
Instructions for controlling the RIDE in Monster mode.
Explains how to activate lights and sound and potential issues.
Details the process for replacing batteries in the vehicle and transmitter.
Addresses common issues preventing the R/C RIDE from working.
Verifies correct frequency band settings for vehicle and transmitter operation.
Addresses issues after impact, focusing on battery case seating and contacts.
Explains how to operate multiple RIDEZ simultaneously in the same area.
Explains the alignment control for ensuring straight-line driving.
Tips for improving R/C operating range and avoiding interference.
Addresses issues with the sound feature and RIDESOUNDZ module.
To Next Page