Need help?Do you have a question about the RIDGE RYDER RR100A and is the answer not in the manual?
General| Brand | RIDGE RYDER |
|---|---|
| Model | RR100A |
| Category | Radio |
| Language | English |
Warns against placing the radio or handpiece in areas prone to airbag deployment.
Instructs to turn off the radio in potentially explosive environments to prevent ignition.
Advises turning off the radio near blasting operations or in posted 'no radio' areas.
Explains compliance with exposure standards and outlines safe operating procedures.
Warns against unauthorized modifications and holding the antenna during use.
Recommends separation distances for pacemakers to minimize potential interference.
Guides on how to transmit audio by pressing the PTT button.
Explains squelch purpose and how to set sensitivity levels.
Details CTCSS/DCS for sharing channels and how they filter signals.
Instructions for enabling and setting CTCSS or DCS sub-channels.
Explains BCL to prevent transmitting on an occupied channel.
Details the transmit and receive procedure to control exposure limits.
Explains how duplex mode uses repeater stations to increase broadcast range.
Provides a guide to receive and transmit channels when using repeaters.
Specifies channels reserved for emergency use (5, 35) and data transmissions (22, 23).
A table listing UHF CB channels and their corresponding frequencies.
A table providing CTCSS codes and their associated audio frequencies (Hz).
A table listing DCS codes and their corresponding octal values.
Continues the DCS code table with additional codes and their octal values.
Emphasizes connecting the antenna before transmitting to prevent radio damage.
To Next Page