RIDGID R01301 - User Manual

To Next Page

To register your RIDGID product,

please visit: register.ridgidpower.com

Pour enregistrer votre produit

de RIDGID, s’il vous plaît la visite :

Para registrar su producto

de RIDGID, por favor visita:

WARNING:

To reduce the risk of injury, the user

must read and understand the opera-

tor’s manual before using this product.

AVERTISSEMENT :

Pour réduire les risques de blessures,

l’utilisateur doit lire et veiller à bien

comprendre le manuel d’utilisation

avant d’utiliser ce produit.

ADVERTENCIA:

Para reducir el riesgo de lesiones,

el usuario debe leer y comprender

el manual del operador antes de usar

este producto.

INCLUDES: Pruner, Blade Sheath, and

Operator’s Manual

****************

INCLUT: Sécateur

, fourreau de lame

, et

manuel d’utilisation

****************

INCLUYE:

Tijeras de podar

, funda de la

hoja,

y manual del operador

****************

OPERATOR’S MANUAL

Manuel de l’opérateur

Manual del operador

18V PRUNER

Sécateur 18 V

Podadora de 18 V

R01301

SAVE THIS MANUAL FOR

FUTURE REFERENCE

GUARDE ESTE MANUAL

PARA FUTURAS CONSULTAS

CONSERVER CE MANUEL

POUR FUTURE RÉFÉRENCE

TABLE OF CONTENTS

 General Power Tool Safety

Warnings ........................................ 2-3

 Pruner Safety Warnings .....................4

 Symbols ......................................... 5-6

 Features .............................................6

 Assembly ...........................................7

 Operation ...........................................8

 Maintenance ................................ 9-10

 Parts Ordering/Service ....... Back Page

TABLE DES MATIÈRES

 Instructions de sécurité générales

pour outils électriques .................... 2-3

 Avertissements de sécurité pour les

sécateurs ...........................................4

 Symboles ....................................... 5-6

 Caractéristiques .................................6

 Assemblage .......................................7

 Utilisatio ......................................... 8-9

 Entretie ......................................... 9-10

 Commande de pièces/

réparatio ........................... Páge arrière

ÍNDICE DE CONTENIDO

 Advertencias de seguridad

para herramientas eléctricas .......... 2-3

 Advertencias de seguridad de las

tijeras de podar ..................................4

 Símbolos ........................................ 5-6

 Características ...................................6

 Armado ..............................................7

 Funcionamiento ............................. 8-9

 Mantenimiento ............................. 9-10

 Pedidos de piezas/

servicio ..........................Pág. posterior

Need help?

Do you have a question about the RIDGID R01301 and is the answer not in the manual?

The device is an 18V Pruner, also referred to as a Secateur or Tijeras de podar, designed for cutting and trimming small limbs and branches. It is a battery-operated tool, emphasizing portability and ease of use without the need for power cords.

Function Description

The pruner is primarily used for cutting small limbs and branches up to 1-1/4 inches (31.8 mm) in diameter. It operates with a trigger mechanism, where pressing the trigger activates the motor and closes the blades to make a cut. The device is designed for single-hand operation, making it convenient for various pruning tasks. It utilizes a rechargeable 18V lithium-ion battery, which provides power for the motor. The battery pack is inserted into a dedicated slot on the pruner, and its removal is necessary for charging and storage.

Important Technical Specifications

Voltage: 18V
Cutting Capacity: 1-1/4 inches (31.8 mm)
Blade: The pruner is equipped with a 2-inch cutting blade, capable of cutting branches up to 1-1/4 inches. The blade is designed for durability and can be sharpened or replaced.
Battery Type: Lithium-ion (Li-Ion) battery pack.
Motor: The device is powered by an electric motor that drives the cutting action.
Safety Features: Includes a safety alert system with various symbols indicating potential hazards such as electrical shock, pinch points, and the need for eye protection. It also has a lock-out trigger to prevent accidental starting.

Usage Features

Assembly: The pruner comes with the main unit, a blade sheath, and an operator's manual. Before use, ensure all parts are present and undamaged.
Battery Installation: The 18V battery pack must be fully seated and secured in the battery port before beginning operation. Always ensure the battery pack is properly inserted to avoid damage or injury.
Operation:
- To Start: Press and hold the switch trigger to open the blade.
- To Cut: Once the blade is open, position the pruner around the branch to be cut. Squeeze the trigger to close the blade and make the cut.
- To Stop: Release the trigger, and the shears will automatically return to the fully open position.
- Cutting Small Limbs and Branches: The device is specifically designed for cutting branches up to 1-1/4 inches. For optimal performance, ensure the blade is sharp and clean.
Applications: This product is intended for cutting and pruning small limbs and branches. It is suitable for use in dry conditions and requires proper eye protection.
Safety Precautions:
- Always wear eye protection with side shields marked to comply with ANSI Z87.1.
- Wear heavy, long pants, long sleeves, boots, and gloves.
- Do not expose the power tool to rain or wet conditions.
- Avoid contact with live electrical wires or cords.
- Keep hands away from the blade to prevent pinch injuries.
- Do not attempt to modify the product or create accessories not recommended for use with this product.

Maintenance Features

Cleaning the Pruner:
- Remove the battery pack before cleaning.
- Clean the body and handles of the product with a soft, dry cloth after each use. Do not use water or soap to clean the blade.
- For stubborn sap or debris, a mild soap solution can be used on the blade, followed by thorough drying.
Lubricating the Blade:
- For easier operation and longer blade life, lubricate the blade before and after each use.
- Apply lubricant product into the hole of the bolt on the blade.
Replacing or Sharpening the Blade:
- Sharpening: Before sharpening, remove the battery pack. Use a T10 Torx screwdriver, a #4 hex key, and a 13mm socket wrench to disassemble the blade. Use a 300-400 grit sharpening stone across the edges of the cutting blade and the fixed blade.
- Replacement: If the blade is dull or damaged beyond sharpening, it can be replaced. Follow the disassembly steps for sharpening to remove the old blade and install a new one. Ensure the new blade is properly aligned and secured.
Storing the Pruner:
- Remove the battery pack from the shear before storing.
- Clean all foreign material from the shear.
- Always place the sheath on the cutting blades before transporting or storing the unit.
- Store it in a place that is inaccessible to children.
- Keep away from corrosive agents such as garden chemicals and de-icing salts.
General Maintenance: Periodically inspect the entire product for damaged, missing, or loose parts. If any parts are damaged or missing, contact customer service for assistance. Use only recommended or equivalent replacement parts.

RIDGID R01301 Specifications

General

Brand	RIDGID
Model	R01301
Category	Pole Saw
Language	English