Need help?Do you have a question about the RIEJU Bye Bike One 2015 and is the answer not in the manual?
Owner's responsibility for safe vehicle operation, following instructions, and using genuine parts.
Pre-ride checks: physical fitness, mental focus, attire, protective gear, and visibility.
Impact of extra weight on handling and stability. Adherence to maximum load capacity.
Hazards of toxic carbon monoxide from exhaust. Avoid indoor or poorly ventilated operation.
Essential advice for safe riding: warm-up, signaling, speed limits, posture, and braking techniques.
Identification and explanation of handlebar controls and dashboard instruments.
Diagram showing the location of major parts visible from the right side of the vehicle.
Diagram showing the location of major parts visible from the left side of the vehicle.
Details the main switch and steering lock functions, including OFF and IGNITION positions.
Explanation of speedometer, odometer, and warning lights on the instrument panel.
Description of left and right handlebar switches for lights, signals, horn, and engine start.
Operation and location of front and rear brake levers.
Procedures for opening the fuel tank, refuelling safely, and fuel tank cap operation.
Essential pre-ride inspection checklist to ensure the vehicle is in safe working order.
Reiteration of pre-riding checks as per Chapter 4 before operating the vehicle.
Detailed steps for starting the engine using the electric starter or kickstarter.
Procedure for safely moving off the centerstand and commencing riding.
Techniques for effective braking using both front and rear brakes simultaneously.
Recommendations for safe refuelling practices and fuel selection.
Safety precautions for performing maintenance, including tool requirements and engine shutdown.
Overview of recommended service intervals for inspections, adjustments, and replacements.
Instructions for checking, cleaning, and replacing the spark plug, including gap specification.
Guidance on cleaning or replacing the wet-type air filter element.
Maintenance of the drive chain and sprockets, including checking, adjusting, and lubrication.
Instructions for checking tyre air pressure, condition, tread depth, and for damage.
How to check brake shoe wear using the indicator and when replacement is needed.
Steps for checking electrolyte level, connections, and breather hose routing.
Information on fuse functions and the procedure for replacing a blown fuse.
Detailed instructions for cleaning the vehicle after normal use and after exposure to rain or salt.
To Next Page
General