Riello NXHM 018 - 7 System Operation; 7.1 Operation Mode Selection; 7.2 Preset Temperature Schedules

63
7 OPERATION
7.1 Operation mode
See “5.3.1 Adjusting space operation mode”.
7.2 Preset temperature
PRESET TEMPERATURE has PRESET
TEMP.\WEATHER TEMP. SET\ECO MODE
3 items.
7.2.1 PRESET TEMP.
PRESETTEMP.functionisusedtosetdi󰀨e-
renttemperatureondi󰀨erenttimewhenthe
heat mode or cool mode is on.
• PRESET TEMP. = PRESET
TEMPERATURE
• ThePRESETTEMP.functionwillbeo󰀨in
these conditions.
1) AUTO mode is running.
2) TIMER or WEEKLY SCHEDULE is
running.
• Go to > PRESET TEMPERATURE >
PRESET TEMP. Press .
The following page will show 6 options of
settingdi󰀨erent"TIME"&"TEMP.".
When double zone is activated, the PRESET
functiononlyworksforzone1.
Use , , , to scroll and use ,
to adjust the time and the temperature.
When the cursor is on ■, as the following
page:
PRESET TEMPERATURE
PRESET
TEMP.
1/2
WEATHER
TEMP. SET
ECO
MODE
NO. TIME TEMP.
1 00:00 25°C
2 00:00 25°C
3 00:00 25°C
SELECT
You press , the symbol ■ becomes .
The time 1 is selected.
You press again and becomes■.The
time 1 is unselected.
Use , , , to scroll and use ,
to adjust the time and the temperature.
Six periods and six temperatures can be set.
Forexample:nowthetime is8:00andthe
temperature is 30°C. We set the PRESET
TEMPasthefollowingtable.
Thefollowingpagewillappear:
NO. TIME TEMPER
1 8:00 35°C
2 12:00 25°C
3 15:00 35°C
4 18:00 25°C
5 20:00 35°C
6 23:00 25°C
TEMP.
00:02 00:8 1 00:5 1 00:2100:8 00:32
35°C
25°C
i
INFORMATION
When the space operation mode is changed,
thePRESETTEMP.iso󰀨automatically.
The PRESET TEMP. function can be used in
the heat mode or cool mode. But if the ope-
ration mode is changed, the PRESET TEMP.
function needs to be reset again.
The running preset temperature is valid
when the unit is OFF. It will run according
tothenextpresettemperaturewhentheunit
turn on again.