Riello RL 800/M FS2 - Accessibility to the Interior of the Combustion Head; Position of Electrodes

15
20034064
GB
Installation
5.7 Accessibility to the interior of the combustion head
In order to reach inside the combustion head (Fig. 11) proceed as
follows:
 disconnect the electrical wiring related to oil pump/servomo-
tor and servomotor 1 - 2;
 disconnect the leverages related to air damper 3) and head
movement 4);
 unscrew the 4 x fixing screws 5);
 Release the cable of the electrodes 6 from the burner head);
 Disconnect the oil pipes by unscrewing the two connec-
tors 7).
 Remove the screw 8) of the combustion head;
 Extract the internal part 9) of the combustion head.
5.8 Position of electrodes
WARNING
While unscrewing, some fuel may leak out of
the swivel fittings.
1
2
3
4
5
5
6
7
8
9
Fig. 11
D11087
4-5mm
26
Fig. 12
D11104