Rigmaster 2007 RigMaster - Page 17

RigMaster Power Service and Repair Manual
Document # S2130909
Copyright RigMaster Power by Mobile Thermo Systems Inc. 09-28-09
S2.13 Cleaning the HVAC Filter:
Procedure:
1. Unscrew the two thumb nuts (A) and
remove the foam air filter from the HVAC
box.
2. Wash the air filter using soapy water or
blow clean with compressed air and allow
filter to dry completely.
3. Reinsert the air filter and hand tighten the
two thumb nuts.
Note
The HVAC filter does not need to be replaced unless it is damaged.
The filter should be cleaned every 1000 hours of operation.
Figure 2
-
12
A