Rigol DG1022Z - To Set Pulse Width;Duty Cycle (Pulse)

RIGOL Appendix
DG1000Z Performance Verification Guide
12
Offset (into 50 Ω)
Range (Peak ac+dc) ±5Vpk ac+dc
Accuracy ±(1% of setting+5mV+0.5% of amplitude)
Waveform Output
Impedance 50Ω (typical)
Protection
Short-
circuit protection, automatically disable waveform
output when overload occurs
Modulation Characteristics
Modulation Type AM, FM, PM, ASK, FSK, PSK, PWM
AM
Carrier Waveform Sine, Square, Ramp, Arb (except DC)
Source Internal/External
Modulating Waveform Sine, Square, Ramp, Noise, Arb
Depth 0% to 120%
Modulating Frequency 2mHz to 1MHz
FM
Carrier Waveform Sine, Square, Ramp, Arb (except DC)
Source Internal/External
Modulating Waveform Sine, Square, Ramp, Noise, Arb
Modulating Frequency 2mHz to 1MHz
PM
Carrier Waveform Sine, Square, Ramp, Arb (except DC)
Source Internal/External
Modulating Waveform Sine, Square, Ramp, Noise, Arb
Phase Deviation 0° to 360°
Modulating Frequency 2mHz to 1MHz
ASK
Carrier Waveform Sine, Square, Ramp, Arb (except DC)
Source Internal/External
Modulating Waveform Square with 50% duty cycle
Key Frequency 2mHz to 1MHz
FSK
Carrier Waveform Sine, Square, Ramp, Arb (except DC)
Source Internal/External