EasyManua.ls Logo

Rigol DG800 Series - Source[:Mod]:Pm

Rigol DG800 Series
209 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 2 Command System RIGOL
DG800 Programming Guide 2-109
modulated waveform.
When [:SOURce[<n>]] or [<n>] is omitted, the system sets the related parameters of CH1 by default.
If the sweep function (
[:SOURce[<n>]]:SWEep:STATe) or burst function
(
[:SOURce[<n>]]:BURSt[:STATe]) is currently enabled, it will be disabled automatically when the
modulation function is enabled.
If the harmonic function is currently enabled (
[:SOURce[<n>]]:HARMonic[:STATe]), the modulation
function cannot be enabled (i.g. the harmonic cannot be modulated).
Return Format
The query returns ON or OFF.
Example
:SOUR1:FSK:STAT ON /*Enables the FSK modulation function of CH1.*/
:SOUR1:FSK:STAT? /*Queries the on/off status of the FSK modulation function of CH1 and the query
returns ON.*/
:SOURce[:MOD]:PM
Command List:
[:SOURce[<n>]][:MOD]:PM[:DEViation]
[:SOURce[<n>]][:MOD]:PM:INTernal:FREQuency
[:SOURce[<n>]][:MOD]:PM:INTernal:FUNCtion
[:SOURce[<n>]][:MOD]:PM:SOURce
[:SOURce[<n>]][:MOD]:PM:STATe
[:SOURce[<n>]][:MOD]:PM[:DEViation]
Syntax
[:SOURce[<n>]][:MOD]:PM[:DEViation] {<deviation>|MINimum|MAXimum}
[:SOURce[<n>]][:MOD]:PM[:DEViation]? [MINimum|MAXimum]
Description
Sets the PM phase deviation of the specified channel.
Queries the PM phase deviation of the specified channel.
Parameter
Name
Type
Range
Default
[<n>]
Discrete
1|2
1
<deviation>
Real
0° to 360°
90°
Remarks
When [:SOURce[<n>]] or [<n>] is omitted, the system sets the related parameters of CH1 by default.
Phase deviation indicates the deviation of the modulating waveform phase from the carrier waveform
phase.
When the external modulation source (
[:SOURce[<n>]][:MOD]:PM:SOURce) is selected, the phase
deviation is controlled by the ±5 V signal level on the rear-panel [Sync/Ext Mod/Trig/FSK]
connector. For example, if the phase deviation is set to 180°, +5 V signal level corresponds to a 180º
phase variation. The lower external signal levels produce less deviation.
Return Format
The query returns the PM phase deviation in scientific notation, with 7 effective digits. For example,
5.000000E+01 (the PM phase deviation is 50°).

Other manuals for Rigol DG800 Series

Related product manuals