RIGOL
DG800 Performance Verification Guide
Document Overview
This manual is used to guide users to correctly test the performance specifications of
DG800 series function/arbitrary waveform generator. The performance verification
test mainly verifies whether DG800 series can work normally and is within
specifications.
Main topics in this Manual:
Chapter 1 Test Overview
This chapter introduces the preparations before the performance verification test,
the recommended test devices, the test result record, the test notices and the
related information of the technical parameters.
Chapter 2 Performance Verification Test
This chapter introduces the test method, procedures and limits of each performance
specification in details.
Appendix
The appendix provides the test results record forms and performance specifications
of DG800 series function/arbitrary waveform generator.
Format Conventions in this Manual:
1. Keys:
The keys on the front panel are usually denoted by the format of "Key Name
(Bold) + Text Box". For example, Utility denotes the Utility key.
2. Menu Labels:
The menu labels are usually denoted by the format of "Menu Word (Bold) +
Character Shading". For example, System Setting.
3. Connectors:
The connectors on the front or rear panel are usually denoted by the format of
"Connector Name (Bold) + Square Brackets (Bold)". For example, [Counter].
4. Operation Procedures:
"" represents the next step of operation. For example, Utility System
Setting denotes that first press Utility on the front panel, and then tap the
System Setting menu label.
To Next Page
Loading...
