Riitek Rii i25 IR User Manual (English)

How to program the remote?

1．Press the SET button for more than 4 seconds, the yellow LED will blink once and lit.

Rii i25 IR Programming Steps

2．Align the Rii remote IR Light with the original remote IR Light (note: distance

less than 7cm). Then, press the key to be programmed, LED indicator will flash

twice and be on, which means the key is ready for programming.

3．Press the key to be programmed in the original remote, Rii remote LED

will flash three times and be on, indicating the programming is completed.

(In the key learning mode within 10 seconds if the button is not pressed

to learn, it will exit the learning state)

4．Repeat steps 2-4 and finish the programming for other keys.

5．Press Set or leave it without any operation 10 seconds, Rii remote will exit programming mode.

Note: The remote control can only support a remote control.

Need help?

Do you have a question about the Riitek Rii i25 IR and is the answer not in the manual?

Riitek Rii i25 IR Specifications

General

Connectivity	2.4GHz Wireless
Operating Range	Up to 10 meters
Keyboard Layout	QWERTY
IR Learning	Yes
Battery Type	Rechargeable Lithium-ion Battery
Backlit	No
Compatibility	Windows, Mac OS, Android, Linux
Touchpad	Yes
Type	Wireless Remote Control
Weight	100 grams

Steps to program the Rii i25 remote using IR learning functionality.

Press the SET button for more than 4 seconds; the yellow LED will blink once and light up.

Align Rii remote IR light with original remote IR light (distance < 7cm) and press key.

Rii LED flashes thrice for completion; press SET or wait 10s to exit programming mode.

Repeat steps 2 and 3 to program other keys on the remote control.