8 9
Mark the screw holes.
Use the bracket as a template to mark
the four corner holes. The recommended
install height is 4 feet above the ground.
Install the anchors. (optional)
If installing on stucco, brick, or concrete,
mark 4 drill holes. Use a 1/4” masonry drill
bit to drill holes in your wall, then insert
the included anchors.
If you’re installing on wood, skip this step.
Install the mounting bracket.
If you’re wiring your Video Doorbell, feed
your doorbell wires through the hole in the
mounting bracket first.
Using a Philips head screwdriver, drive the
screws into your wall (or into the anchors,
if installed) until they are flush with the
mounting bracket.
To Next Page
Loading...
