Motion Detector
Motion Detectors are designed to be smart. They detect movement
through rooms and hallways which an intruder would be likely to
pass through, while allowing you and your family to move freely
through your home.
In Normal Mode, your sensor detects motion constantly, but will
only notify you to the first detection. After three minutes of no
activity, it will restore and be ready to notify you again.
In Test Mode, your sensor detects motion constantly and will notify
you about every 15 seconds. This can help you test for blind spots,
pets, and other environmental triggers.
What you need to know about your Motion Detector:
• Should be installed 2.1m (7’) above the floor.
• Can be placed in a corner or on a flat wall (see illustrations).
• Requires a line of sight view of the room or area
with no obstacles or blind spots.
• Should never face a heat source such as a stove, fireplace or
windows with direct sun.
• Designed to ignore pets under 22kg (50lbs) when set to the
lowest motion sensitivity settings.
14
To Next Page
Loading...
