Maintenance and repaier
Nozzle cleaning method
(nozzle automatic cleaning) in the unseated state, press the
nozzle cleaning button, the nozzle back and forth eight times
back and forth, automatic cleaning.
(manual nozzle cleaning) when the nozzle cleaning button
is pressed for 3 seconds, the nozzle will automatically protrude
and stay for two minutes.
Please clean the nozzle with a soft brush, press the stop button,
and clean automatically after the nozzle is retracted.
Don't push the nozzle by force,
it may causes product failure.
Replace battery
The remote control shows that the brightness of the lamp is obviously
weakened, and it takes two to replace the AAA battery when
the toilet is not moving.confirm+and- and the method of replacing the
battery (refer to the picture).
1. Remove the battery cover.
2. According to the polar direction
of + and - and put the new battery in.
3. Cover the battery cover.
4. Confirm whether it works or not.
battery cover
To Next Page
Loading...