Rinnai Continuum REU2532-W Series User Manual

REU-2532W Series 13 Rinnai
5 °F Over temperature Cut-Off
The temperature of the outgoing hot water is constantly monitored by the water temperature thermistor
located near the outlet of the appliance. If the outgoing water temperature reaches 5 °F above the preset
temperature, the burner will automatically go out. The burner will only ignite again once the outgoing
hot water temperature falls below the preset temperature.

Rinnai Continuum REU2532-W Series Specifications

General

Brand	Rinnai
Model	Continuum REU2532-W Series
Category	Water Heater
Language	English