Need help?Do you have a question about the Rinnai REU-VCM2837 and is the answer not in the manual?
General| Type | Tankless |
|---|---|
| Fuel Type | Gas |
| Maximum Flow Rate | 9.8 GPM |
| Flow Rate | 28.3 L/min |
| Weight | 20 kg |
| Maximum Input | 199, 000 BTU/hr |
| Ignition System | Electronic Ignition |
| Heat Exchanger | Copper |
| Ignition Type | Electronic |
| Category | Water Heater |
| Gas Type | Natural Gas or Propane |
| Temperature Range | 98°F - 140°F |
| Minimum Input | 15, 000 BTU/hr |
| Venting | Direct Vent |
| Vent Diameter | 3 inches |
| Temperature Range (Adjustable) | 98°F to 140°F (up to 160°F with dip switch) |
Step-by-step guide for servicing Rinnai appliances, including component inspection and cleaning.
Procedure to check and set gas pressure for HD50i and HD70E models during installation and service.
Explanation of dip switch functions for Gas Type, Model Choice, and operational modes.
Procedure to check and set gas pressure for HD55 Series models during installation and service.
Explanation of dip switch settings for Model Type, Gas Type, and commercial settings.
Procedure to check and set gas pressure for HDC1200/1500 Series models.
Details on dip switch settings for Gas Type, Model Choice, Commercial, and Flue Length.
Guides on setting water temperature with and without remote controls for HD50i/HD70E.
Guides on setting water temperature for HD55, HDC1200, and HDC1500 Series.
To Next Page