Need help?Do you have a question about the Rion KS-19F and is the answer not in the manual?
General| Brand | Rion |
|---|---|
| Model | KS-19F |
| Category | Accessories |
| Language | English |
Overview of the unit and system configuration examples.
Identification and explanation of all unit parts.
Guide for setting up sampling tubes, purge gas, and fluid connections.
Basic measurement steps and error message information.
Details on the function for canceling erroneous counts.
Procedures for post-measurement steps, including piping cleaning.
Explains countermeasures for indicator lights (CELL, LIQUID LEAK, LASER).
Details when the LIQUID LEAK indicator is lit in red.
Details when the LASER indicator is lit or flashes red/green.
Explains the meaning of WARNING, Caution, Important, and Note markings.
Lists forbidden fluids and guidelines for handling different sample fluids.
Instructions for purging and filling for transport.
Warnings about force on ports and pressure limits.
Guidance on horizontal installation for leak sensor operation.
Instructions for removing sample fluid and cleaning the system.
Advice on using purge gas for contamination prevention.
Details on Class 1 and Class 4 laser product labels.
Instructions to protect the unit from shocks during transport.
Information on the expected service life of the laser diode and its indicators.
Explains the indicators (LIQUID LEAK, PARTICLE MONITOR, etc.) and the LASER OFF switch.
Guidelines for selecting an appropriate installation location.
How measurement is controlled and processed by the KE-40B1.
Explains how indicators signal problems and refers to troubleshooting.
Explains the tendency of particle sensors to produce erroneous counts.
Procedures for removing the KS-19F from the measurement system.
Steps for cleaning the unit's piping with pure water or cleaning fluid.
To Next Page