EasyManua.ls Logo

Riptide R1 - Read Before Riding Safety Guidelines

Default Icon
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
!
2
READ BEFORE RIDING
Always wear a helmet. Other safety gear such as gloves, pads,
closed-toe shoes, long sleeves, and long pants are strongly
advised.
Be aware of other cars and vehicles, as they can kill. Always ride
defensively when in the presence of other vehicles. Be aware of
local laws that govern proper usage of your board on public
roads, bike paths, sidewalks, or other places you may ride.
Braking downhill on a full battery can cause a board shutdown.
Internal circuitry will allow for some braking on a downhill at full
charge, but this braking is limited. To avoid this be sure to ride
on flats or uphill to drain the battery before attempting a
downhill after a full charge.
Your board can lose power and brakes at any moment due to
radio interference, a dead remote battery, downhill overcharging
on a full battery, and other factors. Only ride your board at
speeds and on hills where you’d be comfortable without power
and brakes.
Acceleration in Pro mode is rapid and may be dangerous.
Hills and high speed can be very dangerous. Be sure to start slow
and remain extra careful in these conditions, even if you are an
experienced rider.