The device is a 2MP Wi-Fi Bullet Camera, part of the VUpoint series by RISCO Group, designed for security applications. It is identified by P/N: RVCM52W1400B.
Function Description:
The camera is an IP-based security camera capable of capturing 2-megapixel progressive CMOS images. It can be used as a standalone camera or integrated with a VUpoint Network Video Recorder (NVR) system. Its primary function is to provide video surveillance, with Wi-Fi connectivity for network integration. The camera includes a built-in microphone for audio capture and an LED indicator to display its operational status. It supports local storage via a Micro SD card (32GB supplied).
Important Technical Specifications:
- Image Sensor: 1/2.8" 2 Megapixel Progressive CMOS
- IR Distance: 30 meters
- Focal Length: 2.8 mm
- Power Supply: 12V DC, 0.5A
- Power Consumption: 3.5W
- Wi-Fi Power Output: 20dBm max.
- Wi-Fi Frequency: 2.4 GHz
- Operating Conditions: -30°C to 60°C (-22°F to 140°F) / less than ≤ 95%RH
- Protection: IP67 (indicating dust-tight and protection against immersion in water up to 1 meter for 30 minutes)
- Storage: 32GB Micro SD card (supplied)
Usage Features:
- Connectivity: The camera can be connected to a network via an Ethernet cable (LAN) to a router or wirelessly via Wi-Fi.
- Setup: Initial setup involves connecting the camera to a router, then logging into the Installer Admin Application to add the new camera. Users define camera settings such as name and type.
- Wi-Fi Connection: The setup process includes steps to connect the camera to a Wi-Fi network. If the network is password-protected, the password must be entered.
- Reset Functionality: A reset button is available to return the camera settings to factory default mode. This is achieved by long-pressing the button for 10 seconds until the LED light turns off.
- LED Indicator Status:
- Off: Powered off or LED turned off.
- Red light on: Rebooting after reset or booting.
- Green light flashing: Waiting for network.
- Green light on: Operating properly.
- Red light flashing: Network connection failed.
- Green and red light flashing alternately: Firmware updating.
- Micro SD Card Slot: The camera has a Micro SD card slot for local storage. A 32GB Micro SD card is supplied and must be inserted for normal operation.
- Mounting: A positioning map is included to assist with mounting the camera. A screw package is also provided for installation.
- Waterproof Connector: A waterproof connector is included, suggesting suitability for outdoor use and protection against environmental elements.
Maintenance Features:
- Firmware Updates: The camera supports firmware updating, indicated by the alternating green and red LED light status.
- Troubleshooting: The LED indicator provides visual cues for various device statuses, aiding in basic troubleshooting (e.g., network connection failure, device malfunction).
- Factory Reset: The reset button allows for a quick return to factory default settings, which can be useful for resolving configuration issues.
- SD Card Management: Users are reminded to ensure the Micro SD card is properly inserted for normal operation, implying that the card's status is crucial for the camera's functionality.
The camera is designed for ease of installation and configuration, with clear instructions provided for both wired and wireless network integration. Its robust IP67 rating makes it suitable for various environments, including outdoor installations.
Need help?
General
To Next Page
