6V 100µV
>9M
0.05 + 5
0.5 + 9 1 + 30
1000 V
DC/
AC
RMS
Sine
Continuous
60V 1mV 0.05 + 5
600V 10mV 0.05 + 9
1000V 100mV 0.09 + 10
60mV 1µV
>10G
0.09 + 15
- 1 + 30 Max 10 s
600mV 10µV 0.09 + 15
Frequency
>15 Hz....45 Hz 60 mV
~ , 600
3+30
>65 Hz....100kHz
>15 Hz....45 Hz
6V, 60V,
600V
2+9 3+9
> 65Hz… 1kHz 1+9 3+9
>1kHz…..20kHz 3+9
4+9
>20kHz….100kHz
3.5+30
>15 Hz....45 Hz
1000V
2+9 3+9
> 65Hz… 1kHz 2+9 3+9
>1kHz…..10kHz 3+30
1) Specified Accuracy is valid as of 3% of the measuring range.With Short- circuited test probes: residual value of
1 to 30 d at zero point due to the TRMS converter.
2) At 0°C to 40°C (Accuracy Range)
3) In VAC measurement, Frequency will be shown above 10% of
Measurem ent
Function
Measuring
Range
Resolution
Input
Im pedan
ce
Intri nsic Uncertainty under
Reference Condi tion ±(…% of
the rdg.+…Digits)
Overload Capacity
DC AC ACDC
Val ue Tim e
V
m V
Influence
Quanti ty
Range of Influence Range
Accuracy
DMM
6016
Others
~
~
2)
7) 1) 3) 1) 3)
4)
the present range, except for 1000V & 60mV
range i.e. 25% & 50% respectively.
4) Frequency Influence upto 10kHz.
5) Frequency response up to 50 kHz
6) Frequency response is valid from 10% to 100% of range
7) With Zero Balancing
8) Frequency response up to 100 kHz, for greater than 50 kHz plus 2.5%
9) Overload capacity of the voltage measurement input: power Limiting: Frequency x Voltage Max : 6x10 V x Hz
10) Frequency response greater than 2 kHz plus 2.5%
6)9)
5)
10)
8)
6
To Next Page
Loading...