8
1. Read manual thoroughly before operating machine.
2. Study all warning decals on implement.
3. Most accidents occur because of neglect or carelessness.
4. Do not allow riders on the tractor or implement during operation.
5. Do not allow children on or near the machine.
6. Connect the implement hitch to the tractor before operating the hydraulic system.
NOTE: Be aware of any hydraulic leaks.
7. Always throttle the tractor down and use caution when connecting the implement to the tractor
hitch.
NOTE: Never stand between the tractor and implement.
8. Ensure that safety chains are in place prior to transporting.
9. Ensure that all transport lock pins are secured in place prior to transport.
10. DO NOT lower unit in transport position or swing arm / draft arm damage will occur.
11. Lower the hitch jack onto firm ground and chock the tires when un-hooking implement from tractor.
NOTE: Ensure the unit is on level ground prior to un-hooking tractor.
12. Exercise extra caution when working on hillsides or near ditches.
13. Ensure that the tractor draw-bar is pinned during transport.
14. Maximum speed while transporting the LAND ROLLER is 30 mph (48 km/h).
15. Do not work on this machine when hydraulic system is under pressure.
16. Ensure that the Roller is lowered to the ground before doing any work on machine.
NOTE: If it is necessary to work on machine with the Roller drums raised, ensure that
cylinders are locked in position.
1. Observe all laws and regulations when transporting unit on public roads.
2. Do not transport this machine on public roads unless all safety & maintenance checks have been
completed.
3. Ensure the tires are inflated to the correct pressure:
12.5L-15 : 90 psi
380/55 R16.5 : 70 psi
235/75 R17.5 : 125 psi
This machine will provide years of trouble-free & safe operation IF
all maintenance and safety instructions are followed.
To Next Page
Loading...