2
1 Varies Refer to Section 2 page 44
2 112-0529 Offset Drum Cross c/w Coupling Nuts
3 200-9002 Weld On Bushing
4 261-6001 Ø3-11/16” x 1-5/16” Split Tapered Bearing
5 292-4018 Ø2-7/16” Eccentric Lock Collar, Pltd.
6 292-4022 Ø2-7/16” ID 4-Bolt Flange Bearing
7 525-0510 5/16” x 1-1/4” Capscrew, NC, Gr.5, Pltd.
8 526-0815 1/2” x 1-3/4” Capscrew, NC, Gr.5, Pltd.
9 526-6105 1/2” Stover Lock Nut, NC, Gr.5, Pltd.
10 526-7308 1/2” Stover Lock Nut, NC, Pltd.
11 526-7610 5/8” Stover Lock Nut, NF, Gr.8, Pltd.
12 530-0754 1/2” x 4” Capscrew, NC, Gr.8, Pltd.
13 538-1018 5/8” x 2-1/4” Capscrew, NF, Gr.8, Pltd.
14 540-0836 1/2” x 4-1/2” Socket Head Capscrew, NC, Gr.5, Black
15 550-5208 1/2” Flat Washer, Pltd.
16 550-5617 5/8” SAE Flat Washer, Gr.8 (F436), Pltd.
17 551-4905 5/16” Spring Lock Washer. Black
18 551-5008 1/2” Spring Lock Washer, Pltd.
19 802-2047 Drum Cross Mount Angle
23 805-7041 Spacer, Ø OD x .240w CDSM - 1/8”
24 825-0260 Back Bushing
25 805-8023 Offset Drum Collar, Ø3-1/4” OD x .375w CDSM - 7/8”
26 Varies Refer to Section 2 Page 45
27 827-0017 Replaceable Drum SahftØ2-7/16” OD x 14-3/4”
28 835-1044 1/2 Section Drum End Cap
To Next Page
Loading...