4
1 105-0053 Wing Attachment Weldment, Universal
2 105-0054 Finish Drum Mount Weldment
3 105-0067 Finish Drum Weldment, Ø28” x 20” wide
4 105-0490 Inner Bolt On Boss Weldment, Ø1-1/2” ID x 4-7/8” overall
5 105-0510 Spring Tension Weldment
6 261-5108 Connex Steel Bushing, 1” ID x 3-5/16” long
7 292-4021 1-3/4” ID 4 Bolt Flange Bearing, c/w Eccentric Lock Collar
8 403-0282 Finish Roller Tension Spring
9 419-0006 1/4” Grease Zerk, NF, 90° Elbow, Pltd.
10 526-6210 5/8” Hex Nut, NC, Gr.5, Pltd.
11 526-7308 1/2” Stover Lock Nut, NC, Gr.8, Pltd.
12 526-7310 5/8” Stover Lock Nut, NC, Gr.8, Pltd.
13 526-7316 1” Stover Lock Nut ,NC, Gr.8, Pltd.
14 526-7610 5/8” Stover Lock Nut, NF, Gr.8, Pltd.
15 530-0742 1/2” x 1-3/4” Capscrew, NC, Gr.8, Pltd., Full Thread
16 530-0748 1/2” x 3” Capscrew, NC, Gr.8, Pltd.
17 530-1002 5/8” x 2”, Capscrew, NC, Gr.8, Pltd.
18 530-1656-5.5 1” x 7 Capscrew, NC, Gr.8, Pltd. (cut to 5-1/2”)
19 546-0219 5/8” x 4” Spade Bolt
20 550-5312 3/4” SAE Flat Washer, Pltd.
21 550-5613 1/2” SAE Flat Washer, Gr.8, Pltd.
22 550-5617 5/8” SAE Flat Washer, F436 (Gr.8), Pltd.
23 556-0908 1/4” x 2” Cotter Pin, Pltd.
24 560-1211 Ø3/4” x 2-3/8” Useable, Headed Pin Pltd.
25 827-0088 Spring Tension Mount Pin, Ø1-1/2” x 15-5/16”, Pltd.
26 827-0091 Wing Connecting Pin, Ø1-1/2” x 9-3/8”, Pltd.
27 292-4021 1-3/4” Eccentric Lock Collar
28 Varies Refer to Section 2 page 44
29 Varies Refer to Section 2 page 44
To Next Page
Loading...