12
1 105-0004 Centre Frame Weldment, 12’ Wide
* 105-0097 Centre Frame Weldment, 10 Wide (Narrow)
2 105-0010 Swing Arm Inner Arm Weldment
3 105-0011 Swing Arm Outer Arm Weldment
4 105-0069 Centre Frame Hook Roller Weldment
5 105-0078 Walking Arm Pin Weldment, Ø1-1/2” x 8-1/4” useable
6 105-0083 Wing Attachment Draft Arm Pin, Ø1-1/4” x 6-1/4” useable
7 105-0088 Centre Axle Pin, Ø1” x 8-3/4” useable
8 105-0494 Draft Arm - 237-3/8" C to C Long, F7 - 81’, 85’, 89’ (Heavy Duty)
* 105-0095 Draft Arm - 237-3/8" C to C Long, F5 - 58’, 62’, 68’, 74’, 78’, 84’, F7 - 77’
* 105-0094 Draft Arm - 171-1/8" C to C Long, F3 - 52’, F5 - 46’, 50’, 54’, F7 - 65’, 69’, 73’
* 105-0093 Draft Arm - 161-1/2" C to C Long, F3 - 42’, 46’, 48’
* 105-0474 Draft Arm - 153-7/8" C to C Long, F3 - 36’
* 105-0531 Draft Arm - 137" C to C Long, F3 - 32’
9 105-0511 Wing Attachment Clevis Weldment
* 105-0486 Wing Attachment Clevis Weldment, (F3-32 & 36)
10 419-0004 1/4” NF Grease Zerk, Pltd.
11 419-0100 3/8” NF Grease Zerk, Pltd.
12 526-0624 3/8” x 3” Capscrew, NC, Gr.5, Pltd.
13 526-6103 3/8” Stover Lock Nut, NC, Gr.5, Pltd.
14 526-6109 1” Stover Lock Nut, NC, Gr.5, Pltd.
15 526-7308 1/2” Stover Lock nut, Gr.C, Pltd.
16 526-7312 3/4” Stover Lock Nut, NC, Gr.C, Pltd.
17 530-0744 1/2” x 2” Capscrew, NC, Gr.8, Pltd.
18 530-1248 3/4” x 1-3/4” Capscrew, NC, Gr.8, Pltd.
19 546-5181 3/4” x 6-1/16” x 5-3/4” Inside Leg, U-Bolt, NC, Gr.5, Pltd.
20 550-5206 3/8” Flat Washer, Pltd.
21 550-5212 3/4” Flat Washer, Pltd.
22 550-5318 3/4” SAE Flat Washer, Pltd.
23 550-5316 1” SAE Flat Washer, Pltd.
24 550-5318 1-1/4” SAE Flat Washer, Pltd.
25 550-5613 1/2” SAE Flat Washer, Gr.8, Pltd.
26 551-5012 3/4 Spring Lock Washer, Pltd.
27 554-5401 Ø1-3/4” ID x 10 Ga. Machine Washer, Pltd.
28 554-5410 Ø1-1/2” ID x 10 Ga. Machine Washer, Pltd.
29 556-0906 3/16” x 1-3/4” Cotter Pin, Pltd.
30 805-6005 Swing Arm Shaft Spacer, Ø2-1/4” OD x .240w CDSM -1/4”
31 805-6043 Offset Swing Arm Collar, Ø2-1/4” OD x .240w CDSM - 3/4”
32 825-0025 Swing Arm / Draft Arm Bushing Ø1-3/4 OD x 2-3/4 long
33 826-0006 Draft Arm Pin Bushing , Pltd. Ø1-1/4 OD x 1 long
34 827-0019 Swing Arm / Draft Arm Pin Ø1-1/4 OD x 13-1/4 long
To Next Page
Loading...