16
1 Varies Refer to Section 2 page 44
2 Varies Refer to Section 2 page 44
3 030-5935 Cylinder, Tie - Rod, 3-1/2" X 8"
4 105-0017 Knuckle Weldment for Ø1-1/2” Pin
5 105-0047 Transport Lock Weldment (Truss Claw)
6 105-0082 Transport Lock Pin Weldment, Ø1-1/4” x 7-9/16” Useable
7 105-0086 Cylinder Claw Pin Weldment, Ø1” x 7-5/16” Useable
8 105-0087 Cylinder Pin Weldment, Ø1” x 4 -5/16” Useable
9 105-0490 Inner bolt-In Boss Weldment, Ø1-1/2” ID x 4 -7/8” Overall
10 105-0510 Spring Tension Weldment, (Ø1-9/16” Hole Through)
11 261-5101 Connex Steel Bushing, Ø1-1/2” ID x 2” long
12 261-5103 Connex Steel bushing, Ø1-1/2” ID x 1-1/4 long
13 316-0302 1/2” ORB M x 3/8” JIC M - Adaptor
14 419-0006 1/4” Grease Zerk, NF, Pltd. 90°
15 526-2016 3/8” x 1” Capscrew, DC,Gr.5, Pltd., Scotch Grip
16 526-7308 1/2” Stover Lock Nut, NC, Gr.C, Pltd.
17 530-0744 1/2” x 2” Capscrew, NC, Gr.8, Pltd.
18 530-0748 1/2” x 3” Capscrew, NC, Gr.8, Pltd.
20 550-5206 3/8” Flat Washer, Pltd.
21 403-0501 Snap Ring, HD, for 1-1/2” Shaft
22 550-5316 1” SAE Flat Washer, Pltd.
23 550-5318 1-1/4” SAE Flat Washer, Pltd.
24 550-5613 1/2” SAE Flat Washer, Gr.8, Pltd.
25 551-5006 3/8” Spring lock Washer, Pltd.
27 554-5407 Ø1-1/4” ID Machine Washer, Pltd. 10 Ga.
28 554-5410 Ø1-1/2” ID Machine Washer, Pltd. 10 Ga.
29 556-0906 3/16” x 1-3/4” Cotter Pin, Pltd.
30 805-7101 Wing Hook Roller Bearing, Ø2-3/4” x .625w CDSM - 1-1/2”
31 827-0266 Wing Connecting Pin, Ø1-1/2" - Snap Ring Style
32 827-0088 Spring Tension Mount Pin, Ø1-1/2” x 15-5/16” Overall
33 837-0090 Knuckle Pin, Ø1-1/2” x 16-5/8” Overall
34 827-0091 Wing Connecting Pin, Ø1-1/2” x 9-3/8” Overall
35 830-0305 Light Mount Bracket, Painted, 1/4” HR Plate 19” x 2”
To Next Page
Loading...