20
1 020-6014 CTD 812 Hub Assembly c/w Drive in Studs & Wheel Nuts
2 030-5993 Cylinder, Tie-Rod, 2-1/2" X 6" (Monarch PN 662386)
3 105-0056 Wing Axle Weldment
4 105-0058 Wing Pivot Axle, Bolt In Spindle Weldment
5 105-0068 Wing Axle Slow Moving Sign Bracket, Painted
6 123-2229 Tee Lock Pin Wld., Ø1” x 2-3/4” Useable, Pltd.
7 202-6013 CTD Dust Cap, DC 17 (CTD)
8 203-6044 812 Spindle, Ø2-1/2” x 11-3/4” long
9 Varies Refer to Section 2 page 25
10 Varies Refer to Section 2 page 25
11 261-5100 Connex Steel bushing, 2-3/4 OD x .121w x 2
12 319-5710 1/2” ORB M x 3/8” JIC M – 90º Elbow
13 406-0011 3” Ø x 1” Rubber Puck Stop
14 419-0004 1/4” NF Grease Zerk, Straight, Pltd.
15 424-0001 Slow Moving Sign
16 526-0408 1/4” x 1” Capscrew, NC, Gr.5, Pltd.
17 526-0616 3/8” x 2” Capscrew, NC, Gr.5, Pltd.
18 526-6103 3/8” Stover Lock Nut, NC, Gr.B, Pltd.
19 526-6105 1/2” Stover Lock Nut. NC, Gr.B, Pltd.
20 526-6102 1/4” Stover Lock Nut. NC, Gr.B, Pltd.
21 526-7309 9/16” Stover Lock Nut, NC, Gr.C, Pltd.
22 530-0754 1/2” x 4” Capscrew, NC, Gr.8, Pltd.
23 530-0812 9/16” x 4” Capscrew, NC, Gr.8, Pltd.
24 543-5563 9/16”, Wheel Nut, NF, Gr.5, Pltd.
25 550-5206 3/8” Flat Washer, Pltd.
26 550-5233 Ø2-1/2” ID Flat Washer, Pltd.
27 550-5308 1/2” SAE Flat Washer, Pltd.
28 550-5309 9/16” SAE Flat Washer, Pltd.
29 556-0906 3/16” x 1-3/4” Cotter Pin, Pltd.
30 558-2057 #9 Hitch Pin Clip, Pltd.
31 560-1614 1” x 3-1/2” Cylinder Pin, Pltd.
To Next Page
Loading...