22
1 105-0272 Wing Tie Bar Outer Tube Weldment
2 105-0273 Wing Tie Bar Inner Tube Weldment
3 105-0274 Wing Tie Bar Mount Weldment
4 105-0275 Mount Pin Weldment, Ø1-1/4” x 4-1/4” long
5 105-0278 Removable Pin Weldment, Ø1” x 4-1/4” long
6 105-0484
Wing Tie Bar Parking Mount Weldment
(10’ & 12’ Outer Wings Only)
7 105-0486 Draft Arm Mount (F3-32’ & 36’ Only)
8 Varies Refer to Section 2 page 44
9 422-0010 Ø1” x 4-1/2” Dynaline Lock Pin
10 526-1652 1” x 5-1/2” Capscrew, NC, NC, Gr.5, Pltd.
11 526-6105 1/2” Stover Lock Nut, NC, Gr.B, Pltd.
12 526-6107 3/4” Stover Lock Nut, NC, Gr.B, Pltd.
13 526-6109 1” Stover Lock Nut, NC, Gr.B, Pltd.
14 526-7310 5/8” Stover Lock Nut, NC, Gr.C, Pltd
15 530-1014 5/8” x 1-3/4” Capscrew, NC, Gr.8, Pltd.
16 546-5181 3/4” x 6-1/16” x 5-3/4” inside leg Sq. U-Bolt, NC, Gr.5, Pltd.
17 546-5198 1/2" x 6-1/16" x 5-1/2" inside leg, Sq. U-Bolt, NC, Gr.5. Pltd.
18 550-5308 1/2” SAE Flat Washer, Pltd.
19 550-5318 1-1/4” SAE Flat Washer, Pltd.
20 550-5617 5/8” SAE Flat Washer, Pltd.
21 556-0906 3/16” x 2” Cotter Pin Pltd.
22 558-1248 Hitch Pin Clip, Pltd.
23 558-2057 #9 Hitch Pin Clip, Pltd.
To Next Page
Loading...