To Next PageTo Next PageWhy my RITM OKB ZAO Medical Equipment SCENAR device fails to switch ON?
If your RITM OKB ZAO SCENAR device isn't turning on, the battery is likely discharged. Replace the battery to resolve this issue.
What to do if RITM OKB ZAO Medical Equipment SCENAR device emits short beeps twice a sec when there is no skin contact?
If your RITM OKB ZAO SCENAR device beeps twice a second without skin contact, it probably means the battery is low. Try replacing the battery. If the beeping continues after you replace the battery, contact the manufacturer.
Why RITM OKB ZAO Medical Equipment SCENAR device operates but there is no energy on the built-in electrode?
If your RITM OKB ZAO SCENAR device is running but you don't feel any energy from the built-in electrode, there are two possible reasons: the protective film might still be on the electrode, or the energy level is set too low. First, remove the protective film. If you still don't feel anything, increase the energy level until you feel a comfortable sensation.
General| Brand | RITM OKB ZAO |
|---|---|
| Model | SCENAR Home |
| Category | Medical Equipment |
| Language | English |
Exterior view, indicators, and buttons of the SCENAR Home model.
Exterior view, indicators, and buttons of the SCENAR Sport model.
Exterior view, indicators, and buttons of the SCENAR Basic model.
Initial setup for SCENAR Home: battery, reset, and basic operation.
Initial setup for SCENAR Sport: battery, reset, and basic operation.
Initial setup for SCENAR Basic: battery, reset, and basic operation.
How to use the SCENAR Home for patient treatment, including electrode placement.
How to use the SCENAR Sport for patient treatment, including electrode placement.
How to use the SCENAR Basic for patient treatment, including electrode placement.
