SW02说明书
66*92mm 5折页+对折
正 面
Before using this product, please read the instructions carefully.
Motive C
Stylish Smartwatch
1. Charging
Activate the device by charging it with the magnetic cable initially.
Keep charging cables PIN dry.
It is strongly advised to use DC 5V 1A USB charger for charging.
You can also use your laptop/notebook for charging.
Display Touch Button Heart Rate Sensor
Push the lever to quickly
release and change the strap
2
Figure A
PRODUCT OVERVIEW
LET’S GET STARTED
A. Open the “RS Motive” app and set up user profile. (Figure B)
B. Click on “Add Device” on the next interface (Figure C)
C. Select your MAC address from the list. (Figure D)
3. Binding
2. App Download
RS Motive
3
Note: Tap and hold touch button on time interface to check your
MAC address. (Figure E)
Download “RS Motive” from “Apple Store” or “Google Play Store”
or scan the QR code below.
Compatible with Android 4.4/ iOS 9.0 & above
The connection icon on the home screen indicates successful
connection of the smartwatch with your smartphone. (Figure F)
On the main interface of your smartwatch you can check the time,
date, daily steps, heart rate, the smartwatch's battery.
Main interface
4
Figure DFigure CFigure B
Figure E Figure F
FUNCTION & OPERATION
5
Figure G
Note: The main screen interface is customizable (elements,
wallpapers, fonts, colors...), you can choose from the predefined
interface or choose your own style from the "RS Motive" app.
(Figure G)
Interface Switch
Press and hold touch button to enter function interface
RIVERSONG TECHNOLOGY CO., LTD.
Address：No. 1108 Tower B, Tian’an HighTech
Plaza Phase 1, Futian District, Shenzhen, Guangdong
Official website：www.riversongtech.com
www.riversongtech.com
You can check step
count/calories burned on
Activity page.
ACTIVITY
Note:
1. Activity data will be reset to 0:00 on your smartwatch interface
at the end of the day, you can check previous day data from your
app interface.
2. History data will get cleared in case of app reset or app removal
your smartphone. Otherwise, it will remain saved on your “RS
Motive” app. (Figure H)
7
Figure H
This week has accumulated 632 MET-min
632
8241
SLEEP
You can check sleep data on
this interface.
Note:
Sleep data will be reset to 0:00 on
your watch interface at 8:00 PM
everyday, you can check previous
day data from your app interface.
2. History data will get cleared in case of app reset or removal of
app from your smartphone. Otherwise, it will remain saved on your
“RS Motive” app. (Figure I)
Sleep data will reflect only if you are using your smartwatch while
sleeping.
8
Figure I
5000
08
08
MEASURE HR
Tap and hold touch button for 3
seconds to measure your heart
rate, you can also check your
heart rate via the “RS Motive”
app.
Note
1. Remove the protective film from heart rate sensor before usage.
2. Ensure you have worn your smartwatch correctly while
measuring heart rate.
3. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
4. Heart rate data is for reference only and it cannot be counted
as medical diagnose.
5. Historical heart rate data will be cleared after reset or removal
of app from your mobile phone. Otherwise, it will remain saved on
your “RS Motive” app.
9
SPORTS
Choose your sport mode and start training. You can also check
your training data on the same page. (Figure J)
Press the touch button for 3 seconds to complete your training.
Your running data will be recorded on the “RS Motive” app after
entering "Running” interface.
1. On your "RS Motive" app, activate the "outdoor running“. mode,
and activate the GPS of your smartphone.
2. Activate the "Running" mode on your smartwatch. (Figure K)
Note: Your heart rate will be continuously tracked only once
“Running" interface is activated.
10
Figure K
Figure J
Main
Interface
ACTIVITY
ACTIVITY SLEEP
MEASURE
HR
SPORTS
MEASURE
BP
SPO2 WEATHER
MESSAGE
CAMERA
MUSIC
OTHER
To Next Page
Need help?
General