30
LOAD THE VEHICLE ONTO THE TOW TRUCK
Follow these steps to load the vehicle onto a flatbed tow truck:
1. Ensure the Park brake release is turned on.
2. Remove the wheel chocks.
3. Use the tow truck winch to pull the vehicle onto the tow truck bed.
4. Pull at 5 mph (8 km/h) or less to prevent damage to the drive train.
NOTE
If you pull too fast, the vehicle will stop and return to Park.
5. Tie down the vehicle using eight-point retention straps with two points of contact per corner.
TOWANDTRANSPORT
To Next Page
Loading...
Need help?
General
