35
MANUALLY RELEASE THE CHARGE PLUG
If the charge plug won't release from the charge port, you can manually release it.
NOTE
Make sure you stop a charge session before you unplug from a DC fast charger. Go to Energy in the
center display, and then choose Stop Charging.
1. Open the vehicle hood.
2. Remove the trim panel from the driver side of the vehicle.
3. Gently pull the cable to release the charge plug.
4. Remove the charge plug from the charge port.
5. Replace the trim panel.
6. Close the hood.
STOPCHARGINGINCASEOFANEMERGENCY
To Next Page
Loading...
Need help?
General
