To
Increase Speed While Using
Cruise Control
Here’s the second way to
go
to a higher speed:
There are two ways to go to a higher speed. Here’s the
first:
1.
Use the accelerator pedal to get to the higher speed.
2.
Push the button at the end of the lever, then release
the button and the accelerator pedal. You’ll now
cruise at the higher speed.
1.
Move the Cruise switch from
“ON”
to
“Resume/Accelerate.” Hold it there until you get up
to the speed you want, and then release the switch.
2.
To
increase your speed in very small amounts, move
the switch to “Resume/Accelerate” for less than half
a second and then release it. Each time you do this,
your vehicle will
go
about
1
mph
(1.6
kmh)
faster.
93
To Next Page
Loading...