Twilight Sentinel
Twilight Sentinel turns your
headlights
on
and
off
by
sensing how dark it
is
outside.
To operate
it,
leave the light switch off and move the
Twilight Sentinel control to any position but
OFF.
If you move the control. all the way to
MAX,
your lights
will remain on for three minutes after you turn
off
your
engine.
If
you move the control almost all the way in the
other direction, the lights will
go
off
quickly when you
turn off your engine. You can change this delay time
from only a few seconds to three minutes.
Your Twilight Sentinel and Daytime Running Lights
(Canada Only) work with the light sensor
on
top of your
instrument panel. Don’t cover it up, if you
do
it will read
“dark” and your lights will come on.
97
To Next Page
Loading...