MAN-2V3B-4.1V
Rev (E)
REVISION PAGE
Revision
Date
By
Pages
Revised
Brief Description
B 10/01/08 AC 3-4, 7-1, 7-3,
7-5, 7-6, 7-14
REVISED BOM TO AS-BUILT; UPDATED
DRAWINGS TO REFLECT BOM CHANGE
C
9/18/09
SS
iii
PG. 2
PG. 4
iv, PG. 5
PG. 6
PG. 10
PG. 11, PG. 12
PG. 33
A7458
A3485-5-9
ADDED DRAWING A11151
CHANGED “SHOULD” TO “MUST” FOR
COMPRESSOR MOUNTING
ADDED REFERNCE TO CHECKING
THAT OIL WAS ¾ UP SIGHT GLASS
CHANGED OPERATING RANGE TO 30-40
PSIG
CORRECTED SUCTION PRESSURE
SWITCH SETTINGS AND HIGH GAS
TEMP LIMITS
CHANGED VALVE SERVICE INTERVAL
TO 4500 HRS.
REMOVED REFERENCE TO 2V3 IN
TITLE
ADDED PRESSURE SETTING TO #203
CORRECTED pn FOR # 222
NOW REV B
REDRAWN
B10791 ADDED DETAIL OF FRONT COVER OF
ELECTRICAL PANEL
D 12/1/09 SS iii New drawing numbers for Valve assys. New
rev for Electrical Schematic. Added pressure
callout suffixes to pressure switches.
iv Added max allowable ambient temp
allowance. Removed reference to voltage
requirements page.
2
Changed oil capacity to 1 ¾ quarts. Added
note about changing oil annually.
6 Changed shutdown setting on inlet pressure
switch to 30 psi.
8 Changed oil fill level to ¾ way up. Added
note about checking for oil discoloration.
To Next Page
Loading...